Morston

Wells Quay · Port of Wells

Wells-next-the-Sea Tide Times Today

Today’s high tides for Wells-next-the-Sea are 01:59 and 15:21. Low waters are 09:37 and 22:18. Times are shown in BST.

Updated 5 October 2026 at 12:15

Today’s highs and lows

High water01:59 · 1.95 m · 15:21 · 1.98 m
Low water09:37 · -1.31 m · 22:18 · -0.83 m

A neap tide — less range, quieter streams.

Wells-next-the-Sea · Tide Times

Good midday for a sail

Next high water

15:21

1.98 m

Harbour window

13:51 – 16:51

It’s a neap tide (HW 1.98 m) — less water in Wells Harbour. Forecasts suggest partly cloudy.

Forecast conditions

High Water

15:21

1.98 m

Westerly

13 kn

Gusts 19 kn

Waves

0.4 m · Slight

Small neap tide — there won’t be so much water in Wells Harbour to sail.

Wind · Met Office · 12:15

Sources · Met Office Weather DataHub · WorldTides · Waves: Open-Meteo

Where the water is now
Predicted tide height through the day

14-day tide table

Every high and low water at Wells Quay for the next 14 days. High water follows the BHA Wells clock. Low water lags longer over the Wells bar. Heights are on the local Wells datum, about 2.4 m below Blakeney Bar figures. Planning only.

14-day tide times for Wells-next-the-Sea
Date Tide Time Height
Mon 5 Oct High 01:59 1.95 m
Mon 5 Oct Low 09:37 -1.31 m
Mon 5 Oct High 15:21 1.98 m
Mon 5 Oct Low 22:18 -0.83 m
Tue 6 Oct High 03:41 2.03 m
Tue 6 Oct Low 11:09 -1.61 m
Tue 6 Oct High 16:39 2.28 m
Tue 6 Oct Low 23:38 -1.13 m
Wed 7 Oct High 04:48 2.43 m
Wed 7 Oct Low 12:18 -2.10 m
Wed 7 Oct High 17:40 2.71 m
Thu 8 Oct Low 00:37 -1.56 m
Thu 8 Oct High 05:42 2.92 m
Thu 8 Oct Low 13:13 -2.54 m
Thu 8 Oct High 18:29 3.08 m
Fri 9 Oct Low 01:24 -1.97 m
Fri 9 Oct High 06:28 3.32 m
Fri 9 Oct Low 13:58 -2.84 m
Fri 9 Oct High 19:10 3.32 m
Sat 10 Oct Low 02:04 -2.27 m
Sat 10 Oct High 07:11 3.57 m
Sat 10 Oct Low 14:38 -2.95 m
Sat 10 Oct High 19:47 3.43 m
Sun 11 Oct Low 02:42 -2.44 m
Sun 11 Oct High 07:51 3.64 m
Sun 11 Oct Low 15:16 -2.90 m
Sun 11 Oct High 20:20 3.42 m
Mon 12 Oct Low 03:19 -2.49 m
Mon 12 Oct High 08:29 3.57 m
Mon 12 Oct Low 15:51 -2.73 m
Mon 12 Oct High 20:51 3.34 m
Tue 13 Oct Low 03:55 -2.43 m
Tue 13 Oct High 09:04 3.39 m
Tue 13 Oct Low 16:23 -2.48 m
Tue 13 Oct High 21:21 3.19 m
Wed 14 Oct Low 04:29 -2.29 m
Wed 14 Oct High 09:38 3.13 m
Wed 14 Oct Low 16:53 -2.17 m
Wed 14 Oct High 21:50 3.01 m
Thu 15 Oct Low 05:00 -2.08 m
Thu 15 Oct High 10:10 2.82 m
Thu 15 Oct Low 17:23 -1.84 m
Thu 15 Oct High 22:20 2.79 m
Fri 16 Oct Low 05:32 -1.83 m
Fri 16 Oct High 10:42 2.47 m
Fri 16 Oct Low 17:53 -1.48 m
Fri 16 Oct High 22:51 2.52 m
Sat 17 Oct Low 06:05 -1.53 m
Sat 17 Oct High 11:18 2.09 m
Sat 17 Oct Low 18:28 -1.12 m
Sat 17 Oct High 23:28 2.21 m
Sun 18 Oct Low 06:46 -1.21 m
Sun 18 Oct High 12:06 1.72 m
Sun 18 Oct Low 19:17 -0.75 m
Mon 19 Oct High 00:19 1.90 m

How these tide times are calculated

Data source
WorldTides harmonic predictions for the North Sea.
Reference station
Immingham (53.6183°N, 0.1817°W).
Prediction point
Morston Quay, Blakeney Harbour — the same clock as Blakeney, with no extra creek offset.
Datum
Chart Datum (CD) at Blakeney Bar. Heights are 1.4 m below the raw Immingham feed so a typical high water reads around 5 m.
Timezone
Europe/London — BST in summer, GMT in winter.
This harbour
Wells high water is BHA Hull Albert Dock + 40 min (+12 min versus Blakeney). Low water keeps a longer lag (+63 min versus the Blakeney low). Heights are shifted −2.4 m onto the local Wells chart datum. Window length still uses the Blakeney-datum height, so a true spring is not treated as a small tide just because the number on the page is lower.
Local knowledge adjustment
Immingham times are shifted so they match the harbour clock used on this coast. Real tides still vary with wind and pressure.

About these Wells-next-the-Sea times

Wells is not a shifted copy of Blakeney. The Blakeney Harbour Association sets Wells high water at Hull Albert Dock + 40 minutes — twelve minutes after the Blakeney clock. That is the high water on this page.

Low water is a different story. The ebb out over the Wells bar takes longer. Morston keeps that lag — about an hour after the Blakeney low — so you are not caught thinking the harbour has already drained when the channel is still running.

Heights look smaller because they are on the local Wells datum, about 2.4 m below the Blakeney Bar numbers. A 5.5 m spring at Blakeney reads around 3.1 m here. It is the same North Sea tide, not a weaker one. The outer harbour, the channel, and the quay still need the Port of Wells in your head: this is a working harbour, not the Pit.

Common questions

Why is low water at Wells so much later than high water suggests?
The ebb has to clear the Wells bar. High water follows the BHA Wells offset. Low water is given a longer lag so the page does not pretend the harbour empties on a Blakeney rhythm.
Why are the heights lower than Blakeney?
Local chart datum, not less tide. Subtract about 2.4 m from a Blakeney Bar height and you are on the Wells scale. Compare springs and neaps by the range, or in the Morston app with Wells selected.
Is this Wells Quay or the outer harbour?
Times are the Wells Quay / BHA Wells clock used for planning in the harbour. The bar and the outer channel are their own problem — wind against the ebb especially.
Is this for navigation?
No. Wells is a commercial harbour. Use Port of Wells guidance, and treat these times as planning only.